2000 Honda S2000

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn axle support bush (5.1.2 (b) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Brakes imbalanced across an axle brake binding (1.2.1 (b) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Upper Suspension component pin or bush slightly worn inner arm bush (5.3.4 (a) (i))

Nearside Rear axle support bush worn but not excessive

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Upper Suspension component pin or bush slightly worn inner (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front rust hole inner sill not near component mounting

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front rust hole inner sill not near component mounting

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component mounting prescribed area is corroded but not considered excessive front suspension (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear suspension (5.3.6 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Offside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component mounting prescribed area is corroded but not considered excessive front suspension (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear suspension (5.3.6 (a) (i))

Front Brake pad(s) wearing thin both front brake pads getting low (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread damaged (0.1 (b))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Valve stem slightly damaged (5.2.3 (j))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Valve stem slightly damaged (5.2.3 (j))

Rear Brake pad(s) wearing thin both rear brake pads getting down (1.1.13 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced under side the car corroded (6.1.1 (c) (i))

front brake pads have 4/5mm remaining

headlamp washers not working

rear brake pads have 3/4mm remaining

vehicle has corrosion in the underbody, sills and components through out the car

Nearside Headlamp lens seriously defective lens gone opaque (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective lens gone opaque (4.1.1 (b) (ii))

front brake pads have 4/5mm remaining

headlamp washers not working

rear brake pads have 3/4mm remaining

vehicle has corrosion in the underbody, sills and components through out the car

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside rear parking brake pivot arm not returning to stop on caliper

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside rear parking brake pivot arm not returning to stop on caliper

Windscreen washer provides insufficient washer liquid (8.2.3)

Both front headlamps cloudy/misted

Front Brake pad(s) wearing thin (3.5.1g)

Offside rear parking brake pivot arm not returning to stop on caliper

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate character(s) likely to be misread (6.3.4b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front front brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Both front headlamps cloudy/misted

Front Brake pad(s) wearing thin (3.5.1g)

Offside rear parking brake pivot arm not returning to stop on caliper

Rear registration plate damaged but characters not likely to be misread

Centre Upper Stop lamp not working (1.2.1b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

head lamps dull

o/s/f tyre wearing on inner edge

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

head lamps dull

o/s/f tyre wearing on inner edge

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Rear registration plate dirty (6.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear An item not tested (Manual)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Fuel pipe/s corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear An item not tested (Manual)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)