MOT Status
ExpiredMileage
125,295 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))
o/s/f inner wing corroded outside prescribed area
Exhaust heat shield insecure
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside front inner wheel arch corroded (not prescribed area)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Exhaust heat shield insecure
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside front inner wheel arch corroded (not prescribed area)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
both rear brakes binding on limit
glow plug light on
heat shield loose
n/s/r and o/s/r brake pipes corroded
n/s/r tyre worn inner edge
o/s/r inner sill corroded
o/s/r tyre worn inner edge
rear brake discs corroded
rear chassis corroded
rear shocks corroded
rear springs corroded
rear suspension corroded
slight injector blow
chips in screen within accepted limits
coolant leaking
drivers seat deteriorating
exhaust heat shield damaged
inner sills generally corroded
lower engine mounting worn
rear shock absorber upper casings damaged
rear tyres worn unevenly
side door shuts poorly
sills contain water
some surface corrosion under vehicle
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Drive shaft joint excessively worn (6.1.7 (c) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / chassis (5.3.6 (a) (i))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Windscreen wiper does not clear the windscreen effectively 2 (3.4 (b) (ii))
Front Brake disc fractured bits out of them (1.1.14 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Front brake binding
Offside Outer c.v. boot leaking
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside sliding door shuts poorly
brake discs considerably corroded
chips in screen within accepted limits
coolant leaking
drivers seat deteriorating
exhaust heat shields loose / damaged
inner sills generally corroded
lower engine mounting worn
rear shock absorber upper casings damaged
sills contain water
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake performance not tested due to possible damage/brake pipe (1.2.1 (g))
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Front Brake hose stretched (found during steering lock to lock check) (2.2.D.2b)
Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Hazard warning switch faulty (1.4.B.1d)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear fog lamp not working (1.3.2b)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Rear fog lamp not working (1.3.2b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Rear fog lamp not working (1.3.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
Nearside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear fog lamp not working (1.3.2b)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
front brake discs are worn
nearside front and both rear tyres wearing low on tread and starting to deteriate
offside front inner cv boot is split
oil leaks
slight corrosion to offside front sill, front chassis and rear underside of vehicle
slight play in steering rack
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
all 4 tyres perrished and cracked
nearside inner cv boot split
Ball joint has slight play (2.2.B.1f)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
wipers showing weare
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V658 DYJ is a 1999 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 1999 Mercedes-benz Vito models, the average MOT pass rate is 63.0% with a typical mileage of 117,280 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying V658 DYJ, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 27 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V658 DYJ?
You can check the full history of V658 DYJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V658 DYJ registered?
V658 DYJ is a 1999 Mercedes-benz Vito, first registered on 18 October 1999.
Is V658 DYJ safe to buy?
The MOT history for V658 DYJ shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V658 DYJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V658 DYJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.