2000 Ford Focus

Brakes imbalanced across an axle (3.7.B.5b)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring incomplete (2.4.C.1a)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Fuel tank insecure (7.2.1)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve seized (3.6.E.3)

Registration plate lamp not working (1.1.C.1d)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Shock absorber has a slightly reduced damping effect (2.7.5)

air bag warning light on

coolant level is low

near side front fog light not working or secure

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Seat belt stitching slightly frayed (5.2.2b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Seat belt stitching slightly frayed (5.2.2b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front brake disc excessively pitted (3.5.1h)

Registration plate lamp not working (1.1.5c)

Brake master cylinder fluid close to minimum level (3.6.G.1e)

Front Brake pad(s) wearing thin (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)