1999 Rover 420

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Body has slight corrosion (6.1.B.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Parking brake lever has little reserve travel (3.1.6b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing (2.4.A.3)

Offside Front Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Suspension component mounting prescribed area is excessively corroded Chassis \floor (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corrosion in n/s/f floor pan

front tyres scrubbing inside edge

Offside Rear Brake hose excessively damaged (3.6.B.4d)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

corrosion in n/s/f floor pan

front tyres scrubbing inside edge

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

nsf jacking point area starting to corrode

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

nsf jacking point area starting to corrode

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar attachment bracket/mounting nut missing (2.4.G.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp switch faulty (1.3.1a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Registration plate lamp not working (1.1.5c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.5c)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Rear registration plate deteriorated (6.3.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)