MOT Status
ExpiredMileage
92,008 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Coil spring corroded all (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))
all rear suspension corroded
Emissions not tested (8.2.1.2 (d))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Coil spring corroded all (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))
all rear suspension corroded
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
weld repairs heavily undersealed
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
weld repairs undersealed
Central Rear Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill x2 (7.1.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Coil spring corroded all (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Underneath has corrosion all over
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Coil spring corroded all (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Underneath has corrosion all over
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Outer Subframe mounting prescribed area is corroded but not considered excessive Sill previous repair (2.4.A.3)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Outer Subframe mounting prescribed area is corroded but not considered excessive Sill previous repair (2.4.A.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear section of the body underside has surface rust
Rear suspension bushes are all deteriorating
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Rear Outer Subframe mounting prescribed area is corroded but not considered excessive Sill previous repair (2.4.A.3)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Outer Subframe mounting prescribed area is corroded but not considered excessive Sill previous repair (2.4.A.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear section of the body underside has surface rust
Rear suspension bushes are all deteriorating
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar has excessive play in a ball joint link arm (2.4.G.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Anti-roll bar has excessive play in a ball joint link arm (2.4.G.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V681 JCY is a 2000 Mazda 323 in Blue with a 1,498cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2000 Mazda 323 models, the average MOT pass rate is 68.8% with a typical mileage of 73,964 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying V681 JCY, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 26 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V681 JCY?
You can check the full history of V681 JCY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V681 JCY registered?
V681 JCY is a 2000 Mazda 323, first registered on 25 January 2000.
Is V681 JCY safe to buy?
The MOT history for V681 JCY shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V681 JCY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V681 JCY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.