2000 Rover Mini

Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

rear tyres cracking in tread

Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive BOTH FRONT SILLS (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive BOTH FRONT SILLS (7.1.1 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim too high (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Headlamp aim too low (1.8)

Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)