MOT Status
ValidMileage
115,082 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Coil spring corroded all 4 (5.3.1 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened all arms / both side (5.3.3 (b) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d))
Rear Exhaust silencer insecure (8.1.1 (b) (i))
Coil spring corroded all 4 (5.3.1 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened all arms / both side (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both side (5.3.3 (b) (i))
Rear Coil spring corroded both side (5.3.1 (b) (i))
Rear Inner Tyre worn close to legal limit/worn on edge both side (5.2.3 (e))
Rear Shock absorbers has a reduced damping effect both side (5.3.2 (d))
Rear Shock absorbers has light misting of oil both side (5.3.2 (b))
Rear Subframe mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened both side (5.3.3 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Coil spring corroded Both Sides (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Registration plate inscription illegible (0.1 (b))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Items removed from driver's view prior to test
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Items removed from driver's view prior to test
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Items removed from driver's view prior to test
Offside Rear Tyre worn close to the legal limit on 1.6mm recommend replace (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre has ply or cords exposed outer edge (4.1.D.1b)
Offside Rear Trailing arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V6 HJS is a 2010 Ford S-max in White with a 1,999cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2010 Ford S-max models, the average MOT pass rate is 74.2% with a typical mileage of 83,408 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying V6 HJS, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 16 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V6 HJS?
You can check the full history of V6 HJS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V6 HJS registered?
V6 HJS is a 2010 Ford S-max, first registered on 31 December 2010.
Is V6 HJS safe to buy?
The MOT history for V6 HJS shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V6 HJS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V6 HJS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.