1999 Mercedes-benz A-class

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush excessively worn Both Sides (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. Both Sides (1.2.2 (a) (i))

Offside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Coil spring fractured or broken broken (5.3.1 (b) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt upper boot split also play in balljoint (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Coil spring insecure not located upper end (5.3.1 (a) (i))

Items removed from driver's view prior to test ()

Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Rear Stop lamp(s) light intensity obviously reduced dim (4.3.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Steering column top bearing slightly worn (2.1.2c)

Centre Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components

exhaust is starting to corrode and deteriorate

some steering and suspension bushes are starting to deteriorate

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components

exhaust is starting to corrode and deteriorate

some steering and suspension bushes are starting to deteriorate

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)