2000 Fiat Ducato

Front Windscreen washer provides insufficient washer liquid both (3.5 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c))

Offside Front Brake pipe at imminent risk of failure or fracture fouling on alternator cable bracket (1.1.11 (a)) DANGEROUS

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering holed (6.1.1 (c) (ii)) DANGEROUS

Rear Loading door likely to open inadvertently or not remain closed (6.2.3 (b) (ii)) DANGEROUS

Nearside Front Shock absorbers has a slightly worn bush top strutt mount (5.3.2 (c))

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Wiper blade starting to split

Central Front Main beam 'tell-tale' not working (1.7.4c)

Central Rear Mechanical brake component has restricted free movement cable frayed (3.5.1k)

Nearside Front Braking system leaking brake pipe (3.6.A.1)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Exhaust has a major leak of exhaust gases exhurst boxes (7.1.2)

Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under step area -by crossmember (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember corrision (6.1.B.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Body has slight corrosion (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Subframe mounting prescribed area is corroded but not considered excessive All mounts (2.4.A.3)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front & rear bushes (2.4.G.2)

vehicles had welded repairs in past coated with underseal

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

previus repairs coated with underseal

Nearside Front Subframe mounting prescribed area is excessively corroded rear mount (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded strut top (2.4.A.3)

Nearside Rear Brake pipe excessively corroded union (3.6.B.2c)

Offside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded rear mount (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded strut top (2.4.A.3)

Offside Rear Brake pipe excessively corroded union (3.6.B.2c)

Offside Rear wheel bearing has excessive play (2.6.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

All welding repairs covered with underseal

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

Both front brake discs are corroded and worn on the inner surfaces

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Radiator suport pannel is corroded

Front wheel bearing has slight play (2.5.A.3c)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Suspension joint offside lower dust cover split/missing

front cross member corroded

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Front wheel bearing has slight play (2.5.A.3c)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Suspension joint offside lower dust cover split/missing

front cross member corroded

Centre Exhaust has a part missing (7.1.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp insecure (1.7.3)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Macpherson strut upper support bearing is rough in operation (2.5.B.1b)

Rear Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Front Braking system leaking (3.6.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Headlamp aim beam image too far to the right (1.6.B4)

Brake pad(s) wearing thin (3.5.1g)