2000 Piaggio Vespa

Front Brake hose fouling rubbing on wheel (3.2.B3b)

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel alignment incorrect which adversely affects the handling (2.5.1)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fairings insecure but not likely to impede the steering held with tape (2.1.2e)

Front mudguard missing

Nearside Front Direction indicator damaged but function not impaired (1.5.3a)

Offside Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear body damaged

body damaged

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Motorcycle structure slightly corroded (6.1.1a)

Rear Rear suspension movement is excessively stiff (2.4.A.3b)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Steering headbearing has excessive free play (2.2.2)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Front Motorcycle structure slightly corroded (6.1.1a)

Centre Front Lower Motorcycle structure excessively corroded (6.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too low (1.6)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear suspension movement is excessively stiff (2.4.A.3b)

Steering headbearing has excessive free play (2.2.2) DANGEROUS

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front wheel bearings have slight free play (2.3.5b)

Offside Front Motorcycle structure slightly damaged (6.1.1a)

Oil leak

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel has slight free play on splined output shaft

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering headbearing has excessive free play (2.2.2)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front mudguard insecure (2.3.7)

Front suspension has inadequate damping effect. (2.3.6c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering headbearing has excessive free play (2.2.2)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Lower Motorcycle structure slightly corroded (6.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Horn not working (1.7.3a)

Front Lower Motorcycle structure slightly corroded (6.1.1a)

Wheel alignment slightly misaligned. (2.5.1)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Front wheel bearings have slight free play (2.3.5b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front position lamp missing (1.1.1a)

Nearside Rear shock absorber has a light misting (2.4.A.1c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear shock absorber has a light misting (2.4.A.1c)