1999 Ford Explorer

All suspension components corroded

suspension components corroded

All front and rear suspension components have slight surface corrosion

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both D (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing both 2016 tyres (5.2.3 (d) (ii))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

nsf body mount slightly corroded

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering body mount (6.1.1 (c) (ii)) DANGEROUS

All front and rear suspension components have slight surface corrosion

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both D (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing both 2016 tyres (5.2.3 (d) (ii))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))

nsf body mount slightly corroded

Corrosion to brake servo

Corrosion to components, and underside of vehicle

Front fog lamps not working

Nearside Electrical wiring slightly deteriorated chassis earth (4.11 (b) (i))

Nearside Rear inner seal corroded

Offside Front torsion bar bent

Offside seat belt anchorage prescribed area repair not visible coated in sealant

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Service brake binding but not excessively (1.2.1 (f))

Offside Rear Seat belt anchorage prescribed area is inadequately repaired inner seal area (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Corrosion to brake servo

Corrosion to components, and underside of vehicle

Front fog lamps not working

Nearside Electrical wiring slightly deteriorated chassis earth (4.11 (b) (i))

Nearside Rear inner seal corroded

Offside Front torsion bar bent

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Brake pipe clips or supports missing, pipe adequately supported Pipes (1.1.11 (d) (i))

Corrosion to brake servo

Corrosion to components, and underside of vehicle

Front Front Fog lamps not working

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen wiper blade defective Fronts (3.4 (b) (i))

Horn not working (7.7 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe inadequately clipped or supported pipes (1.1.11 (d) (i))

Front Windscreen wiper blade defective fronts (3.4 (b) (i))

Front fog lamps not working

Oil leak, but not excessive front (8.4.1 (a) (i))

corrosion to brake servo

corrosion to components, and underside of vehicle

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid or pipe (1.1.16 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Brake test not completed due to leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Parking brake: efficiency below requirements (3.7.B.7)