2000 Nissan Primera

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Front suspension has excessive movement at a suspension ball joint (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar attachment bracket/mounting nut missing (2.4.G.1)

Offside Front Front suspension has excessive movement at a suspension ball joint (2.5.A.1c)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front front brake juddering severely (3.7.A.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Play in steering rack inner joint(s)

both rear inner wings excessively corroded

driver seat belt stiching slightly frayed

engine management light indicating fault

offside rear tyre slightly worn on inner edge

rear brake disc's rusty

rear bumper slightly loose

Nail in offside rear tyre

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Slight play nearside front rack end inner joint

Under-trays fitted obscuring some underside components

offside front wing panel damaged

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in offside rear tyre

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Slight play nearside front rack end inner joint

Under-trays fitted obscuring some underside components

offside front wing panel damaged

Offside Rear Brake pad(s) wearing thin (3.5.1g)

engine management light on

front heatshield insecure

rear discs pitted

Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Headlamp aim too low (1.8)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

engine management light on

front heatshield insecure

rear discs pitted

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

eml on

front crossmember corroded

offside front wing corroded and holed

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

eml on

front crossmember corroded

offside front wing corroded and holed

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

slight play in offside front top swivel bearing

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

slight play in offside front top swivel bearing

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

both front tyres

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

both front tyres

Front Windscreen wiper not operating automatically when switched on (8.2.1b)