1999 Aprilia RS 50

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

general body damage light switchs loose on bars front tyre starting to debond

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Throttle operating incorrectly (6.2.1f)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

general body damage light switchs loose on bars front tyre starting to debond

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake pedal is damaged and the brake cannot be readily applied (3.1.3c)

Front position lamp insecure (1.1.1c)

Headlamp aim too high and too far to the right. (1.6)

Rear Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Wheel alignment slightly misaligned. (2.5.1)

Rear suspension bush has slight free play (2.4.A2a(i))

indicators only flashing correctly with engine running

Front Headlamp aim beam image too far to the right (1.6.4)

Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Rear suspension bush has excessive free play (2.4.A2a(i))

Offside Front suspension assembly slightly corroded. (2.3.1)

Rear wheel bearings are slightly rough (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

security of front lower fairing/belly pan