2000 Ford Fiesta

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement beam axle bushes (5.3.4 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Central Front Exhaust has a minor leak of exhaust gases exhaust leak at front hanger repair (6.1.2 (a))

Nearside Front Road wheel slightly distorted wheel inner & outer rim slightly damaged/distorted (5.2.2 (c) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement nearside & offside rear axle bushes worn with movement detected (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside rear inner sills and rear inner arches corroding (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair nearside & offside rear service brake effort low (1.2.1 (c))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill patch repair plate not fully seam welded (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill patch repair plate not fully seam welded (5.3.6 (a) (i))

Offside Rear Wheel bearing has excessive play also slightly noisy (5.1.3 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Central Front Exhaust has a minor leak of exhaust gases exhaust leak at front hanger repair (6.1.2 (a))

Nearside Front Road wheel slightly distorted wheel inner & outer rim slightly damaged/distorted (5.2.2 (c) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive Gearbox underside slightly damp with oil (8.4.1 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement nearside & offside rear axle bushes worn with movement detected (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside rear inner sills and rear inner arches corroding (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair nearside & offside rear service brake effort low (1.2.1 (c))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected inner and outer sill (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected inner and outer sill (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Registration plate lamp likely to become detached (4.7.1 (c) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Horn not working (1.6.2a)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/f & n/s/f lower arm bushes starting to seperate

rear no plate cracked

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

o/s/f & n/s/f lower arm bushes starting to seperate

o/s/r brake hose slight twisted

rear no plate cracked

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s & n/s front lower arm bushes starting to seperate

rear no plate cracked

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Stop lamp not working (1.2.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s & n/s front lower arm bushes starting to seperate

rear no plate cracked

o/s & n/s rear brake pipes starting to corrode

Nearside Headlamp aim too high and too far to the right. (1.8)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

o/s & n/s rear brake pipes starting to corrode

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)