2000 Nissan Micra

Emissions unable to be completed due to exhaust (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Windscreen wiper blade defective split (3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Front Upper head lamp clip broken

Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced wheel arch (6.1.1 (d) (i))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Windscreen wiper blade defective split (3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Front Upper head lamp clip broken

Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced wheel arch (6.1.1 (d) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner wheel arch (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front cross member (6.1.1 (c) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner wheel arch (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis cross member (6.1.1 (c) (i))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Trailing arm mounting (5.3.6 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake lagging in operation (1.2.1 (d))

Nearside Front Lower Suspension arm ball joint has slight play Outer ball joint (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn Outer ball joint (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play Outer ball joint (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Split pins missing from both front bottom ball joints

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Play in steering rack inner joint(s) ()

Offside Play in steering rack inner joint(s) ()

Stop lamp not working (1.2.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside rear brake binding (3.7.B.1)

both rear tyres perished (NO CORDS EXPOSED)

Corrosion on front crossmember

Nearside Registration plate lamp not working (1.1.C.1d)

Corrosion on front crossmember

Nearside rear brake application uneven (3.7.B.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

rear brake application uneven (3.7.B.2)