1999 Honda City Express

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Suspension has poor dampening affect.

Headlamp light intensity reduced (4.1.4 (a))

Nearside Brake lever is short but brake can still be readily applied End broken off. (1.1.2 (d))

Offside Indicator switch faulty (4.4.2 (a) (i))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Suspension has poor dampening affect.

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Box insecure.

Front suspension soft.

Rear suspension soft.

Sharp edge on front.

Sharp edge on rear.

Front Steering damper ineffective (2.1.4 (d) (i))

Front Steering operation impeded by a fairing (2.1.4 (e))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Box insecure.

Front Sharp edge.

Rear Sharp edge.

Stand insecure with sharp edge.

Front Front suspension lightly rubbing not affecting the movement of the suspension (2.3.6a)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Upper Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Stand broken and slightly insecure.

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front tyre is worn unevenly .

o/s mirror glass is misty.

Front Brake lever cannot be applied smoothly lever is notchy in application. (3.1.3d)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Inner Brake pad(s) less than 1.5 mm thick Pad on metal. (3.2.A1f(i)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front tyre is worn unevenly .

o/s mirror glass is misty.

Front Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever cannot be applied smoothly (3.1.3d)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)