1999 Gilera Runner

Front Brake grabbing severely (1.2.1 (c))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Position lamp showing white light to the rear (4.2.3 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Stop lamp showing white light to the rear (4.3.3 (a) (ii))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Valve stem slightly damaged (5.2.3 (j))

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brake hose slightly chafed (1.1.12 (b) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

throttle operation slightly rough

Central Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Headlamp aim too high (4.1.2 (a))

Registration plate insecure (0.1 (a))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Valve stem slightly damaged (5.2.3 (j))

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brake hose slightly chafed (1.1.12 (b) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

throttle operation slightly rough

Steering headbearing has slight free play (2.2.2)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp incorrect colour (1.1.2b)

Rear suspension movement is excessively stiff (2.4.A.3b)

Steering headbearing has slight free play (2.2.2)

Front Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Nearside Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings are slightly rough (2.4.A.2c)

front mud guard missing

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Headlamp aim too low and too far to the left. (1.6)

Offside Front Direction indicators not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Nearside Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings are slightly rough (2.4.A.2c)

front mud guard missing

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Steering headbearing has slight free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Front Brake caliper(s) securing bolt(s) loose (3.2.A1j)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Steering headbearing has slight free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Riders seat insecure (6.2.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Front suspension has inadequate damping effect. (2.3.6c)

Handlebar deformed (2.1.1b)

Rear Brake caliper(s) securing bolt(s) missing (3.2.A1j)

Rear Front suspension has inadequate damping effect. (2.3.6c)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Both tyres are flat

Front brake disc bolts have been rubbing the N\S fork leg

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

air filter missing

bolts on front disc run close to strut

front wheel bearing rough when rotated

Oil leak

Fairings insecure and likely to impede the steering (2.1.2e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Oil leak

Rear Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Front suspension has inadequate damping effect. (2.3.6c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

slight wear rear hub assembly and gear box