2000 Toyota Yaris

Child Seat fitted not allowing full inspection of adult belt ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill at rear (6.2.2 (d) (i))

Child Seat fitted not allowing full inspection of adult belt ()

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Child Seat fitted not allowing full inspection of adult belt ()

Front Child Seat fitted not allowing full inspection of adult belt Both rear seats have child seats fitted ()

Front Anti-roll bar linkage pin or bush excessively worn Both front drop links have excessive play (5.3.4 (a) (i))

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel Little effort from nsr wheel (1.3.1 (a) (i))

Front Child Seat fitted not allowing full inspection of adult belt Both rear seats have child seats fitted ()

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both rear inner sils have slight corrosion (6.2.2 (d) (i))

Battery insecure (1.9.1)

Rear registration plate faded but not likely to be misread (6.3.1d)

Exhaust system corroded

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Exhaust system corroded

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)