2000 Vauxhall Corsa

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive under sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal under sill (5.3.6 (a) (i))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive under sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal under sill (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength beam / spring mount area on chassis (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Driver's seat with a defective structure (6.2.5 (a) (i))

Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Body has slight corrosion chassis (coil spring mount) (6.1.B.2)

Offside Front Tyre worn close to the legal limit 165 70 13 T (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Inner Body has slight corrosion sill (6.1.B.2)

Emissions not tested (7.3.A.1)

Nearside Front Tyre tread depth below requirements of 1.6mm 165 70 13 T (4.1.E.1)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Body has slight corrosion chassis (coil spring mount) (6.1.B.2)

Offside Front Tyre worn close to the legal limit 165 70 13 T (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Inner Body has slight corrosion sill (6.1.B.2)

Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

both cv joints knocking on full lock