1999 Subaru Forester

Front Subframe mounting prescribed area is corroded but not considered excessive Subframe (5.3.6 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive Axle corroded (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced mounting point in wheel arch (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting in wheel arch (5.3.6 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced mounting point in wheel arch (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting in wheel arch (5.3.6 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

fuel filler neck corroded

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Service brake fluctuating, but not excessively (1.2.1 (e))

Brake pipe excessively corroded Front to rear (1.1.11 (c))

Fuel pipe leaking (6.1.3 (b) (i))

Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arm mount (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases Center joint (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis beside lower arm rear mount (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 205/70R15 On the limit (5.2.3 (e))

Exhaust has a major leak of exhaust gases Backbox (6.1.2 (a))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a minor leak of exhaust gases at centre joint (7.1.2)

Exhaust has a minor leak of exhaust gases backbox (7.1.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt inner (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has a light misting of oil and reduced damping effect (2.7.3)

both rear main brake pipes covered with tape at bends before flexi hoses

front exhaust heat shields loose and rattling

Offside Registration plate lamp not working (1.1.C.1d)

Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)