MOT Status
ExpiredMileage
195,236 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Suspension component mounting prescribed area is corroded but not considered excessive both sills (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Rear Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Headlamp aim too high (1.8)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Oil leak
Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp aim too low (1.8)
Oil leak
Front Brake pad(s) wearing thin (3.5.1g)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Offside Front Front position lamp(s) incorrect colour (1.1.A.3e)
Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.5c)
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V876 FPG is a 2000 Ford Focus in Silver with a 1,796cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 56%.
Across all 2000 Ford Focus models, the average MOT pass rate is 67.9% with a typical mileage of 90,238 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying V876 FPG, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 26 years old, this Ford Focus is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V876 FPG?
You can check the full history of V876 FPG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V876 FPG registered?
V876 FPG is a 2000 Ford Focus, first registered on 28 February 2000.
Is V876 FPG safe to buy?
The MOT history for V876 FPG shows 25 tests with a 56% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V876 FPG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V876 FPG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.