2000 Hyundai Coupe

All direction indicators slightly discoloured all 4 (4.4.3 (a))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear 1/4 panel damaged

Offside Rear wheel arch corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both front wings corroded

Brake fluid contaminated (1.8 (a))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

All direction indicators slightly discoloured all 4 (4.4.3 (a))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear 1/4 panel damaged

Offside Rear wheel arch corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both front wings corroded

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (jacking point) (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit edge (4.1.E.1)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit edge (4.1.E.1)

Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Front Direction indicator slightly discoloured (1.4.A.2f)

Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nail in nearside rear tyre

Nail in offside rear tyre

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.4)

n/s front tyre worn on inside edge

tyres low