MOT Status
ExpiredMileage
53,798 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Ball joint has slight play both sides (2.2.B.1f)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Sub-frame rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (5.2.6)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded sill/sill end (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively both sides (8.2.2)
Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Ball joint dust cover deteriorated, but preventing the ingress of dirt all (2.2.C.1c)
Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement all (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill/sill end (2.4.A.3)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Mechanical brake component locking device missing (3.5.1l)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Seat belt anchorage prescribed area is excessively corroded sill/floor (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded boot floor (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Ball joint dust cover deteriorated, but preventing the ingress of dirt all (2.2.C.1c)
Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement all (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill/sill end (2.4.A.3)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Gearbox mounting defective
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Steering rack gaiter deteriorated (2.2.D.2d)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Gearbox mounting defective
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Steering rack gaiter deteriorated (2.2.D.2d)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Items removed from driver's view prior to test
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
welding repairs carried out recently under sealed
Items removed from driver's view prior to test
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
welding repairs carried out recently under sealed
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Brake pipe excessively corroded (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Lower Ball joint has slight play (2.2.B.1f)
Front Upper Ball joint has slight play (2.2.B.1f)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Front Lower Ball joint has slight play (2.2.B.1f)
Front Upper Ball joint has slight play (2.2.B.1f)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp insecure (1.7.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
How Reliable is the Rover Mini?
Based on 519,169 MOT tests across 45,631 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V894 LFV is a 1999 Rover Mini in Red with a 1,275cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 1999 Rover Mini models, the average MOT pass rate is 70.2% with a typical mileage of 44,443 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Mini fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 32,036 recorded failures. If you're considering buying V894 LFV, it's worth having these areas checked by a mechanic before committing.
The Rover Mini typically stays on UK roads for around 47 years. At 27 years old, this Rover Mini is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V894 LFV?
You can check the full history of V894 LFV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V894 LFV registered?
V894 LFV is a 1999 Rover Mini, first registered on 31 December 1999.
Is V894 LFV safe to buy?
The MOT history for V894 LFV shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V894 LFV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V894 LFV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.