2000 Ford Focus

Exhaust heat shield insecure

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Brake load sensing valve seized (3.6.E.3)

Centre Exhaust has a major leak of exhaust gases Unable to carry out emissions test (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp aim too high (1.8)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Exhaust heat shield insecure

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate character(s) likely to be misread (6.3.4b)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)

EXHAUST HEAT SHIELD INSECURE

N/S/F/ O/S/F / ANTI ROLL BAR MID BUSHES SLIGHTLY WORN

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Rear Anti-roll bar fractured (2.4.G.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside upper dust cover split/missing

Offside Front Brake pad(s) has restricted free movement (3.5.1k)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside upper dust cover split/missing

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)