2000 Iveco Daily

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever defective but can be satisfactorily operated travel reserve (1.1.6 (d))

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Parking brake lever worn, but not excessively (1.1.6 (b) (i))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Body has slight corrosion both sides inner and outer (6.1.B.2)

Front Body has slight corrosion front both sides (6.1.B.2)

Front Brake pad(s) wearing thin both sides (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Front coil spring corroded both sides (2.4.C.1b)

Oil leak ()

Parking brake lever has little reserve travel (3.1.6b)

Parking brake lever ratchet mechanism is slightly worn (3.1.5)

Play in steering rack inner joint(s) ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Vehicle underbody has surface rust covering some steering suspension components, front anti-roll bar corroded, rear anti-roll bar corroded, rear leaf springs slightly corroded, n/s/f steering arm has slight play,

parking brake has little reserve travel, both sides front wheel arches have surface rust

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

rear service brake efficiency only just met - 50%

vehicle underbody chassis area & both rear inner and outer sills covered with sealant unable to assess.

Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle underbody has surface rust covering some steering suspension components, front anti-roll bar corroded, rear anti-roll bar corroded, rear leaf springs slightly corroded, n/s/f steering arm has slight play,

parking brake has little reserve travel, both sides front wheel arches have surface rust

underbody has undersealant not allowing full inspection of corrosion

Horn not working (1.6.2a)

Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust back box corroded

Engine covers fitted obscuring some components in the engine bay

Osf and nsf tyres outeredge worn Front underbody chassis covered in sealents nearside inner and outer sill covered in sealents.

Under-trays fitted obscuring some underside components

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

front brake pads low

power steering pipes corroding

scuffing to both front tyre outer walls

scuffing to n/s/r tyre outer wall

Nearside Front Direction indicator incomplete (1.5.A1b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

front brake pads low

power steering pipes corroding

scuffing to both front tyre outer walls

scuffing to n/s/r tyre outer wall