MOT Status
ValidMileage
164,386 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pipe corroded, covered in grease or other material corroded at flexi (1.1.11 (c))
Nearside Front Nail in tyre ()
Nearside Rear Tyre slightly damaged/cracking or perishing cracked in tread (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material corroded at flexi (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing cracked in tread (5.2.3 (d) (ii))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front cross member (6.1.1 (c) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre inner sill (6.1.1 (c) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre outer sill (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material corroded at flexi (1.1.11 (c))
Nearside Front Nail in tyre ()
Nearside Rear Tyre slightly damaged/cracking or perishing cracked in tread (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material corroded at flexi (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing cracked in tread (5.2.3 (d) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sill (7.1.1 (a) (i))
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front radiator support corroded (6.2.2 (d) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Oil leak, but not excessive Slight leak at hub oil seal. (8.4.1 (a) (i))
Offside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Anti-roll bar has slight play in a pin bearing (2.4.G.2)
Oil leak ()
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar has slight play in a pin bearing (2.4.G.2)
Offside Front inner sill holed
Oil leak ()
Offside Front Body has slight corrosion (6.1.B.2)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake: efficiency below requirements (3.7.C.1b)
Rear fog lamp not working (1.3.2b)
Offside Front Body has slight corrosion (6.1.B.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear fog lamp not working (1.3.2b)
Offside Front Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Front position lamp(s) not working (1.1.A.3b)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak from engine
Parking brake lever has little reserve travel (3.1.6b)
Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V910 OBA is a 2000 Mazda Bongo in White with a 1,990cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2000 Mazda Bongo models, the average MOT pass rate is 69.4% with a typical mileage of 122,442 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying V910 OBA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 26 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V910 OBA?
You can check the full history of V910 OBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V910 OBA registered?
V910 OBA is a 2000 Mazda Bongo, first registered on 31 December 2000.
Is V910 OBA safe to buy?
The MOT history for V910 OBA shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V910 OBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V910 OBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.