MOT Status
ExpiredMileage
125,635 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced across an axle (3.7.B.5b)
Emissions not tested (7.0)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Front suspension has a suspension lower ball joint securing nut not locked (2.5.B.1a)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside front brake application uneven (3.7.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
tyre wear is uneven
Oil leak
Front Brake pad(s) wearing thin (3.5.1g)
Nail in nearside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
coolant low
exhaust emissions only passed after extensive preconditioning, catalyst operation appears waek.
front jacking points, surface corroded
rear suspension bushes slighty deterioated
sill covers fitted unable to inspect outer sills fully
slight misting on rear shock absorbers
unable to fully inspect brake pipes incased area
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
exhaust emissions only passed after extensive preconditioning, catalyst operation appears waek.
front jacking points, surface corroded
rear suspension bushes slighty deterioated
sill covers fitted unable to inspect outer sills fully
slight misting on rear shock absorbers
unable to fully inspect brake pipes incased area
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
front jacking points, surface corroded
rear suspension bushes slighty deterioated
sill covers fitted unable to inspect outer sills fully
slight misting on rear shock absorbers
unable to fully inspect brake pipes incased area
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust rattling internally
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Registration plate lamp not working (1.1.5c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust rattling internally
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
uneven wear front tyres,(inner edges),nearside front tyre close to limits,(central 3/4 band).
How Reliable is the Rover 416?
Based on 648,418 MOT tests across 110,608 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V913 PBH is a 1999 Rover 416 in Red with a 1,589cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 1999 Rover 416 models, the average MOT pass rate is 67.6% with a typical mileage of 71,424 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 416 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 47,498 recorded failures. If you're considering buying V913 PBH, it's worth having these areas checked by a mechanic before committing.
The Rover 416 typically stays on UK roads for around 35 years. At 27 years old, this Rover 416 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V913 PBH?
You can check the full history of V913 PBH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V913 PBH registered?
V913 PBH is a 1999 Rover 416, first registered on 20 December 1999.
Is V913 PBH safe to buy?
The MOT history for V913 PBH shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V913 PBH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V913 PBH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.