2000 Daihatsu Terios

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Registration plate insecure (0.1 (a))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced gearbox mounting (6.1.1 (c) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced gearbox mounting (6.1.1 (c) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

chassis and suspension have extensive surface corrosion

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside & offside chassis (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Coil spring corroded Both fronts & nearside rear (5.3.1 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside & offside, perished (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive Inner wing /arch areas (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm to axle (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge also perished (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive nearside & offside, back ends of sills into wheel arch areas (7.1.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside, shock absorber mounting areas (5.3.6 (a) (i))

rear fog lamp lens slightly damaged

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits .68% (8.2.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Outer Drive shaft joint excessively worn (6.1.7 (c) (i))

Child Seat fitted not allowing full inspection of adult belt ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement Nearside & offside (2.4.G.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive Chassis crossmember area (2.4.A.3)

Front Suspension arm corroded but not seriously weakened Nearside & offside (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis crossmember area (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Nearside & offside inner wing areas (2.4.A.3)

Front under guard obscuring view of chassis & crossmember, unable to assess corrosion

Nearside Front Tyre worn close to the legal limit Smooth on outside edge (4.1.E.1)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Oil leak ()

coil spring corroded Fronts & rears (2.4.C.1b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Subframe mounting prescribed area is excessively corroded Nearside & offside chassis areas (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis, trailing arm mounting area (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Outersill & back end of sill areas (2.4.A.3)

Offside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded Outersill & back end of sill areas (2.4.A.3)

Rear Seat belt anchorage prescribed area is excessively corroded Nearside & offside, inside wheel arch areas (5.2.6)

Rear Suspension component mounting prescribed area is excessively corroded Nearside & offside inside wheel arch areas (2.4.A.3)

Rear fog lamp emits a light other than red Lens broke (1.3.2e)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement Nearside & offside (2.4.G.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive Chassis crossmember area (2.4.A.3)

Front Suspension arm corroded but not seriously weakened Nearside & offside (2.4.G.1)

Front Suspension arm corroded but not seriously weakened Nearside & offside (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis crossmember area (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Nearside & offside inner wing areas (2.4.A.3)

Front under guard obscuring view of chassis & crossmember, unable to assess corrosion

Nearside Front Tyre worn close to the legal limit Smooth on outside edge (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Oil leak ()

coil spring corroded Fronts & rears (2.4.C.1b)

Items removed from driver's view prior to test ()

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear rear exhaust rubber snapped but exhaust still secure

Emissions not tested (7.3.A.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Items removed from driver's view prior to test ()

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear rear exhaust rubber snapped but exhaust still secure

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak, advise to repair

various slight corrosion

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak, advise to repair

various slight corrosion

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Both rear inner sills slightly corroded

Engine covers fitted obscuring some components in the engine bay

Nearside rear tyre low on outside edge, also perrished and cracking

Under-trays fitted obscuring some underside components

Front coil spring corroded (2.4.C.1b)

Offside Headlamp aim too high (1.8)

Rear coil spring corroded (2.4.C.1b)

Front coil spring corroded (2.4.C.1b)

Rear coil spring corroded (2.4.C.1b)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

brake fluid level low

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Rear Exhaust has a part missing (7.1.1a)

brake fluid level low