MOT Status
ExpiredMileage
106,257 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Both rear chassis show signs of corrosion
Both sills show signs of corrosion
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Trailing arm has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Stop lamp not working (1.2.1b)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Sub-frame has excessive play in a pin/bush (2.4.G.2)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Service brake: efficiency below requirements (3.7.B.7)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Brake pipe excessively corroded (3.6.B.2c)
Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Tyre worn close to the legal limit (4.1.E.1)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Fiesta?
Based on 33,753,820 MOT tests across 2,828,392 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V929 GMW is a 2000 Ford Fiesta in White with a 1,242cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2000 Ford Fiesta models, the average MOT pass rate is 66.7% with a typical mileage of 64,944 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Fiesta fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 959,538 recorded failures. If you're considering buying V929 GMW, it's worth having these areas checked by a mechanic before committing.
The Ford Fiesta typically stays on UK roads for around 34 years. At 26 years old, this Ford Fiesta is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V929 GMW?
You can check the full history of V929 GMW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V929 GMW registered?
V929 GMW is a 2000 Ford Fiesta, first registered on 7 February 2000.
Is V929 GMW safe to buy?
The MOT history for V929 GMW shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V929 GMW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V929 GMW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.