MOT Status
ValidMileage
287,793 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Front Suspension component mounting repair covered in underseal all (5.3.6 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive door shut (7.1.1 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Rear Suspension component mounting repair covered in underseal all (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
All suspension components have heavy surface rust
Exhaust mounting defective Centre bracket (6.1.2 (a))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
All suspension components have heavy surface rust
Exhaust mounting defective Centre bracket (6.1.2 (a))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
All suspension components have heavy surface rust
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Centre D bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Centre D bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Oil leak, but not excessive Gear box steel pipe to cooler corroded and leaking slightly (8.4.1 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
All suspension components have heavy surface rust
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Centre D bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Centre D bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Oil leak, but not excessive Gear box steel pipe to cooler corroded and leaking slightly (8.4.1 (a) (i))
Nearside Rear corrision outside prescribed areas
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear corrision outside prescribed areas
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Cross member corroded but not within limits
Rear Exhaust mounting defective (6.1.2 (a))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Non obligatory mirror damaged ()
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Cross member corroded not within limits
Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear fog lamp not working (1.3.2b)
Parking brake lever has little reserve travel (3.1.6b)
Vehicle structure has slight corrosion (6.1.B.2)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear Vehicle structure has slight corrosion (6.1.A.1)
oil leaks gearbox and engine
Coolant leak
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside front inner sill holed through corrosion but not within prescribed area
Oil leak
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Side repeater has less than 50% of the light sources illuminating (1.4.A.2c)
Rear fog lamp not working (1.3.2b)
Coolant leak
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside front inner sill holed through corrosion but not within prescribed area
Oil leak
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
nearside rear and offside front tyres starting to crack on side wall
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Child seat fitted not allowing full inspection of adult belt
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front discs worn
rear discs corroded edges
Nearside Side repeater not working (1.4.A.2c)
Offside Rear fog lamp not working (1.3.2b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Nearside Headlamp aim too low (1.8)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front discs worn
rear discs corroded edges
Body has slight corrosion (6.1.B.2)
Front brake disc slightly pitted (3.5.1h)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc slightly pitted (3.5.1h)
n/s and o/s front tyres worn on inner edges
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V930 KCV is a 2009 Mazda Bongo in Silver with a 2,490cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2009 Mazda Bongo models, the average MOT pass rate is 66.8% with a typical mileage of 130,773 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying V930 KCV, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 17 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V930 KCV?
You can check the full history of V930 KCV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V930 KCV registered?
V930 KCV is a 2009 Mazda Bongo, first registered on 17 December 2009.
Is V930 KCV safe to buy?
The MOT history for V930 KCV shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V930 KCV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V930 KCV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.