MOT Status
ExpiredMileage
146,965 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive chassis shock mount (5.3.6 (a) (i))
inner and outer sills corroded
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive chassis shock mount (5.3.6 (a) (i))
inner and outer sills corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill as marked (5.3.6 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill as marked (7.1.1 (a) (i))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Arch as marked (7.1.1 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 23% (1.2.1 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases Box (7.1.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases Box (7.1.2)
Nearside Rear Tyre worn close to the legal limit and perished (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear fog lamp not working (1.3.2b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit and perished (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
exhaust
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear fog lamp not working (1.3.2b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Under-trays fitted obscuring some underside components
sill covers fitted
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
sill covers fitted
Exhaust has a minor leak of exhaust gases (7.1.2)
rear number plate starting to delaminate
Brake pad(s) wearing thin (3.5.1g)
Nail in offside front tyre
Nearside Headlamp aim too high (1.8)
Offside Rear fog lamp not working (1.3.2b)
nearside rear brakes binding slighty
Brake pad(s) wearing thin (3.5.1g)
Nail in offside front tyre
nearside rear brakes binding slighty
rear number plate starting to delaminate
How Reliable is the Ford Freda?
Based on 28,175 MOT tests across 1,491 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V937 OBA is a 2009 Ford Freda in Black with a 1,990cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2009 Ford Freda models, the average MOT pass rate is 67.2% with a typical mileage of 126,790 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Freda fails its MOT is fog lamp not working, accounting for 879 recorded failures. If you're considering buying V937 OBA, it's worth having these areas checked by a mechanic before committing.
The Ford Freda typically stays on UK roads for around 31 years. At 17 years old, this Ford Freda is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V937 OBA?
You can check the full history of V937 OBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V937 OBA registered?
V937 OBA is a 2009 Ford Freda, first registered on 1 December 2009.
Is V937 OBA safe to buy?
The MOT history for V937 OBA shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V937 OBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V937 OBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.