MOT Status
ExpiredMileage
102,082 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch to chassis (2.4.A.3) DANGEROUS
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3) DANGEROUS
Offside rear brake recording little or no effort (3.7.B.5a) DANGEROUS
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor panel (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis to crossmember (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive floor panel (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor panel (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis to crossmember (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive floor panel (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive floor panel (2.4.A.3)
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Radius arm has slight play in a pin bearing (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
both number plate lights poor
offside rear tyre worn low on both edges
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear Exhaust system not adequately supported (7.1.1)
Rear Fuel system component insecure (7.2.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
offside rear tyre close to limit
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Headlamp aim too low (1.8)
Rear Brake pipe slightly corroded (3.6.B.2c)
offside rear tyre close to limit
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust system not adequately supported (7.1.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
offside rear tyre has some cracking on tread
Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too low (1.8)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 106?
Based on 2,880,076 MOT tests across 319,421 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V943 KMS is a 2000 Peugeot 106 in Red with a 1,124cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2000 Peugeot 106 models, the average MOT pass rate is 66.8% with a typical mileage of 66,731 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 106 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 155,158 recorded failures. If you're considering buying V943 KMS, it's worth having these areas checked by a mechanic before committing.
The Peugeot 106 typically stays on UK roads for around 34 years. At 26 years old, this Peugeot 106 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V943 KMS?
You can check the full history of V943 KMS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V943 KMS registered?
V943 KMS is a 2000 Peugeot 106, first registered on 25 February 2000.
Is V943 KMS safe to buy?
The MOT history for V943 KMS shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V943 KMS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V943 KMS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.