1999 Ford Explorer

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

sill covers fitted

Battery insecure (1.9.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

sill covers fitted

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust rusty

n/s rear shock rusty

o/s rear shock rusty

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

MIL lamp illuminated

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

MIL lamp illuminated

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

N/S rear shock absorber cover rusted through

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Battery insecure (1.9.1)

Parking brake: efficiency below requirements (3.7.C.1b)

N/S rear shock absorber cover rusted through

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

all wheels hard to turn by hand possibly due to brakes binding or transmision bind.

road test reviled noise sounding like wheel bearings,unable to pick up whilst spining wheels by hand due to transmision/brake bind

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Temporary fuel cap fitted

all wheels hard to turn by hand possibly due to brakes binding or transmision bind.

road test reviled noise sounding like wheel bearings,unable to pick up whilst spining wheels by hand due to transmision/brake bind

Rear Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar linkage fractured (2.4.G.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Registration plate lamp not working (1.1.5c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

ADVISE HANDBRAKE TRAVEL