1999 Mazda MX-5

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

front bumper and off side wing insecure

Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Body panel slightly loose (6.2.1 (a) (i))

Nearside Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear corrosion on seals

Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear corrosion on seals

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Body panel slightly loose (6.2.1 (a) (i))

Nearside Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear corrosion on seals

Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear corrosion on seals

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened rear (5.3.3 (b) (i))

Front Position lamp not working both (4.2.1 (a) (ii))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Rear Position lamp not working both (4.2.1 (a) (ii))

Road wheel fixing missing all 4 wheel one nut missing (5.2.1 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened rear (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Brake pipe inadequately supported (3.6.B.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Registration plate lamp not working (1.1.C.1d)

Nail in nearside front tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

brake pipes corroding

front tyres worn