2000 Ford Fiesta

Centre Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Emissions not tested (7.0)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Fuel system component insecure (7.2.1)

Rear registration plate deteriorated (6.3.1d)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Body has slight corrosion (6.1.B.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

oil leak from gearbox.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Obligatory mirror insecure (8.1.1)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear coil spring incomplete (2.4.C.1a)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Registration plate lamp insecure (1.1.C.1c)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

both front brake flexi hoses perished (just meet pass standard)

both outer CV gators perished

both rear axle beam bushes deteriorating

both rear brake flexi hoses perishing

both rear metal brake pipes corroded (just meet pass standard)

exhaust corroding

front brake discs lipped and corroded

front brake pads getting low

gearbox oil leak

general underbody corrosion

hand brake has travell

n/s CV gator is pin holed

n/s/r tyre getting low on tread

o/s/r suspension top mount has lift (just meets pass standard)

rear reg plate deteriorating

Nearside Headlamp aim too low (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Shock absorber has negligible damping effect (2.7.5) DANGEROUS

Offside Rear Shock absorber has a serious fluid leak (2.7.3) DANGEROUS

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake: efficiency below requirements (3.7.D.4)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)