2003 Ford Galaxy

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material to caliper (1.1.11 (c))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbone (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material to caliper (1.1.11 (c))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbone (5.3.4 (a) (i))

rear seats removed

Central Exhaust has a major leak of exhaust gases and rear (6.1.2 (a))

Front Service brake excessively fluctuating (1.2.1 (e))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material to caliper (1.1.11 (c))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbone (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material to caliper (1.1.11 (c))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbone (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear seats removed

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Both front brake discs have corroded inside faces but not yet affecting operation

Offside Front Tie bar/rod has slight play in a pin bearing lower joint (2.4.G.2)

Small corrosion hole in offside front outrigger but just outside prescribed area

Exhaust has a major leak of exhaust gases around last joint before back box from corrosion (7.1.2)

Nearside Rear brake caliper leaking from handbrake control lever seal (3.6.A.1)

Both front brake discs have corroded inside faces but not yet affecting operation

Offside Front Tie bar/rod has slight play in a pin bearing lower joint (2.4.G.2)

Small corrosion hole in offside front outrigger but just outside prescribed area

Offside Front Tie bar/rod has excessive play in a ball joint (2.4.G.2)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both drive shaft constant velocity joint inner gators leaking grease

both front bottom balljoint rubbers split