2004 Mazda MX-5

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 4mm tread (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 3.5mm Tread (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 4mm tread (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 3.5mm Tread (5.2.3 (e))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front discs corroded

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

suspension components corroded

underbody corroded in areas + under sealed

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

discs corroded

suspension components corroded

underbody corroded in areas + under sealed

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

N/S/R inner seal slightly corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

O/S/R outer seal slightly corroded

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Slight blow from rear silencer

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Under trays fitted limiting underside view

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Vehicle structure has slight corrosion inner sill (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion outer sill (6.1.B.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Vehicle structure has slight corrosion inner sill (6.1.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

rear disc slighty pitted

Rear discs heavily corroded

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear discs heavily corroded

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake pads worn close to legal limit.

rear brake pads wearing thin.