2001 Subaru Legacy

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Outer Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust gas printer fault