MOT Status
ValidMileage
134,530 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Tow ball missing at time of test
All suspension , components corroded front & rear
Extensive corrosion to under body
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Arch (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel arch (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Battery carrier corroded
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Arch (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel arch (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Sill covers fitted
Front & rear suspension component's corroded
Front Anti-roll bar ball joint dust cover severely deteriorated Both (5.3.4 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 3mm ( 1.6 limit ) (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Area outside Prescribed area corroded (6.1.1 (c) (i))
Offside Battery carrier corroded
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Upper Offside Front Upper Corroded & holed ,Area outside Prescribed area is excessively corroded
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Area outside Prescribed area corroded (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Tow ball missing at time of test
Front & rear suspension component's corroded
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced ,Area outside Prescribed area corroded (6.1.1 (c) (i))
Offside Battery carrier corroded
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Upper Offside Front Upper Corroded & holed ,Area outside Prescribed area is excessively corroded
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced ,Area outside Prescribed area (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Tow ball missing at time of test
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brakes dragging
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill box (5.3.6 (a) (i))
Offside Battery tray corroded
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Corroded & holed ,Area outside Prescribed area is excessively corroded
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Central Brake pipe excessively corroded Drivers side (1.1.11 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Inner Brake prescribed area is excessively corroded Wing (1.1.21 (e) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Long hand brake travel
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Sill ,Area outside Prescribed area is excessively corroded
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Inner Sill ,Area outside Prescribed area is excessively corroded
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner sill holed not within a prescribed area
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Radiator support corroded holed
Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
n/s/f inner sill corroded
o/s battery tray corroded
o/s/f inner sill corroded
Central Brake pipe corroded, covered in grease or other material Drivers side (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Sill corroded
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Inner Sill corroded
Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Central Brake pipe corroded, covered in grease or other material Drivers side (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Inner Sill corroded
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Inner Sill corroded
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Upper Brake pipe slightly corroded (3.6.B.2c)
Brake pedal spongy (3.3.B.1b)
Front Brakes imbalanced across an axle (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
front brake disc are corroded and pitted
rear brake disc are corroded and pitted
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
All brake disc poor
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VA51 XLY is a 2009 Mazda Bongo in White with a 2,490cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 80%.
Across all 2009 Mazda Bongo models, the average MOT pass rate is 66.8% with a typical mileage of 130,773 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying VA51 XLY, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 17 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VA51 XLY?
You can check the full history of VA51 XLY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VA51 XLY registered?
VA51 XLY is a 2009 Mazda Bongo, first registered on 1 December 2009.
Is VA51 XLY safe to buy?
The MOT history for VA51 XLY shows 20 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VA51 XLY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VA51 XLY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.