2010 Mazda Friendee

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing [badly[ (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing ;badly ] (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

been under sealed through out

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Seat belt missing all rear (7.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing [badly[ (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing ;badly ] (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

been under sealed through out

exhaust heat sheild loose

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wishbone mounting (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view centre (3.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside sill corroded but not within a prescribed area

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside sill corroded but not within a prescribed area

Central Exhaust has a minor leak of exhaust gases flexi section (6.1.2 (a))

Offside Inner center sill corrosion but not within prescribed area

Windscreen washer not working (3.5 (a))

Offside Inner center sill corrosion but not within prescribed area

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded outrigger (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outrigger (2.4.A.3)

Offside Rear wheel arch

Body has slight corrosion Offside front inner sill (6.1.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside front tyre.195/70r15

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)

BOTH HEADLIGHT LENS STARTING TO DETERIORATE.

FRONT AND REAR PADS WEARING THIN.

FRONT TYRES WEARING LOW ON EDGES.

O/S/F HEADLIGHT LENS TARNISHED.

Nearside Headlamp aim too high (1.8)

O/S/F HEADLIGHT LENS TARNISHED.

Offside Headlamp aim too high (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Rear fog lamp missing (1.3.2a)

Registration plate lamp not working (1.1.5c)