2011 Mazda Bongo

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure 205/65/16c (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Oil leaking excessively from engine (8.4.1 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Central Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering SEAL (6.1.1 (c) (ii)) DANGEROUS

Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering SEAL (6.1.1 (c) (ii)) DANGEROUS

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Emissions not tested due to exhaust leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases front flexi pipe (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Position lamp not working (4.2.1 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

both rear tyres perrishing