2003 Mazda RX-8

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms upper and lower (5.3.3 (b) (i))

rear exhaust clamp heavily corroded

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Rear exhaust clamp corroded

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Coil spring corroded all x4 (5.3.1 (b) (i))

underside of vehicle suspension components corroded

various metal brake pipes corroded

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coolant leak ()

various areas of surface corrosion under vehicle

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

rubbing noise at rear

Nearside Stop lamp not working (1.2.1b)

Offside Rear Anti-roll bar linkage insecure (2.4.G.1)

rubbing noise at rear

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside rear brake binding (3.7.B.1)

Offside Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Nearside Front Anti-roll bar linkage missing (2.4.G.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)