2004 Mitsubishi Outlander

Brake pipe corroded, covered in grease or other material Al brake pipes coated in grease (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Fuel filler hose corroded,

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Rear wiper blade torn

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

slight corrosion on rear exhaust joint

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

slight corrosion on rear exhaust joint

Both rear tyres worn on edges

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high and too far to the right. (1.8)

Offside Headlamp aim too high and too far to the right. (1.8)