2007 Peugeot 107

Items removed from driver's view prior to test dash cam ()

Offside Rear Brake pipe corroded, covered in grease or other material pipe at flexi join area (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides axle bush mount area (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides lower arm - rearward bushes (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material at flexi pipe area (1.1.11 (c))

Offside Rear number plate light lens - missing

Rear Stop lamp(s) lens defective which has no effect on emitted light high level brake light - inside lens dirty (4.3.1 (b) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides chassis/inner sill/under floor areas (6.2.2 (d) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rearmost bumper support bar - corroded (6.2.2 (d) (i))

Front Wheel bearing has excessive play both sides (5.1.3 (a) (i))

Front Wheel bearing rough when rotated both sides (5.1.3 (b) (i))

Nearside Rear Brake pipe excessively corroded at flexi pipe area (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides lower arm - rearward bushes (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material at flexi pipe area (1.1.11 (c))

Offside Rear number plate light lens - missing

Rear Stop lamp(s) lens defective which has no effect on emitted light high level brake light - inside lens dirty (4.3.1 (b) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides chassis/inner sill/under floor areas (6.2.2 (d) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rearmost bumper support bar - corroded (6.2.2 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Tyre slightly damaged/cracking or perishing all 4 tyres cracked (5.2.3 (d) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Tyre slightly damaged/cracking or perishing all 4 tyres cracked (5.2.3 (d) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

nearside rear brake pipe slightly corroded

nearside rear tyre worn slightly

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

nearside rear brake pipe slightly corroded

nearside rear tyre worn slightly

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)