2002 Honda CB500

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain has a horseshoe clip type link fitted

Drive chain has a horseshoe clip type link fitted

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Central Rear Tyre tread not clearly visible (5.2.3 (e))

Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii))

Coolant leak Hose to water pump ()

Drive chain slightly tight chain has some tight spots (6.1.7 (k) (i))

Front Tyre perishing but no cord or ply showing

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swing arm bearings (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain excessively loose (6.1.7 (c) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Coolant leak Hose to water pump ()

Front Tyre perishing but no cord or ply showing

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swing arm bearings (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly pitted (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Front wheel bearings have excessive free play (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Steering headbearing has excessive free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings are slightly rough (2.4.A.2c)

Front brake lever broken

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Front Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Roller brake test indicates a severely juddering brake (3.3.A1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))