2005 Mazda 6

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Front SIDE REPEATER LENS MISSING

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front side repeater lens missing

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear cross member rusty

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front side repeater lens missing

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear cross member rusty

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front side repeater lens missing

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front side repeater lens missing

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front front brake binding (3.7.B.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

exhast system in rusty condition

nearside front tyre has sidewall damage

underside of vehicle has surface corrosion

all front and rear steering, braking and suspension components are corroding but at the time of test was not excessive enough to fail

exhaust rusty including brackets

nearside and offside front and rear chassis rails are corroding but at the time of test was not excessive enough to fail

nearside and offside inner sills front to back are corroding but at the time of test was not excessive enough to fail

offside front tyre is wearing on the inner edge

various front and rear suspension bushes are perishing/cracking but at the time of test no excessive play was present

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

all front and rear steering, braking and suspension components are corroding but at the time of test was not excessive enough to fail

exhaust rusty including brackets

nearside and offside front and rear chassis rails are corroding but at the time of test was not excessive enough to fail

nearside and offside inner sills front to back are corroding but at the time of test was not excessive enough to fail

offside front tyre is wearing on the inner edge

various front and rear suspension bushes are perishing/cracking but at the time of test no excessive play was present

offside rear tyre slightly perished

oil level low (topped up to minimum)