2012 Toyota Verso

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Shock absorbers has negligible damping effect both (5.3.2 (d))

Nearside Front non obligatory mirror slight loose

Offside Front Direction indicator incorrect colour colour is white (4.4.3 (a))

Horn not working properly Have to press hard and in one area of horn pad (7.7 (a) (i))

Nearside Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Nearing wear limit. Has nail in tyre tread (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge nearing wear limit (5.2.3 (e))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced end of the slam panel is bent round (6.1.1 (a) (i))

Headlamps matched pair are not the same colour (4.1.4 (d))

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp aim too low and too far to the right. (4.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Seat belt webbing significantly weakened middle row, seatbelt has been cut on half and stitched by hand back together (7.1.2 (b) (ii)) DANGEROUS

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Seat belt webbing slightly damaged or frayed middle row (7.1.2 (b) (ii))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced end of the slam panel is bent round (6.1.1 (a) (i))

Nearside Front Track rod end slightly misaligned (2.1.3 (e))

Nearside Front Track rod end slightly misaligned (2.1.3 (e))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

nail in offside front tyre

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear position lamp(s) not working (1.1.A.3b)

nail in offside front tyre

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.C.1d)