MOT Status
ExpiredMileage
143,168 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded outriggers (5.2.6)
Nearside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded out rigger (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded next to arm mount (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded outriggers (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded outrigger (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded front subframe mount (2.4.A.3) DANGEROUS
Suspension component mounting prescribed area is excessively corroded front subframe mount (2.4.A.3) DANGEROUS
Brake pipe slightly corroded front to rear lower (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front c/v gaiter clip hitting shocky
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
em light on
heavy corrosion on parts of body and underside
track rod play
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Inner Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt (2.4.G.4e)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nail in the n/s/r tyre inside edge
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
horn rough
surface corrosion on underside
Brake load sensing valve seized (3.6.E.3)
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
both rear backing plates corroded (brake)
surface corrosion on underside
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in nearside front tyre
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Spare tyre defective
condensation in offside headlamp
heavy surface corrosion to underside
nearside rear tyre perished
rear valance/crossmember corroded and holed
roughness in both front top strut bearings
Brakes imbalanced across an axle (3.7.B.5b)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Anti-roll bar fractured (2.4.G.1)
Offside Anti-roll bar linkage insecure (2.4.G.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside rear brake binding (3.7.B.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in nearside front tyre
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Spare tyre defective
condensation in offside headlamp
exhaust deteriorated and tail pipe corroded
exhaust heatshield insecure
heavy surface corrosion to underside
nearside rear tyre perished
rear valance/crossmember corroded and holed
roughness in both front top strut bearings
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rear section exhaust deteriated
Brake load sensing valve seized (3.6.E.3)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Parking brake lever has no reserve travel (3.1.6b)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
o/s/r tyre worn on inner edge
rear section exhaust deteriated
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Spare tyre defective
cannot see all brake pipes
exhaust tail pipe corroded
handbrake almost at end of travel
Nearside Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Spare tyre defective
cannot see all brake pipes
exhaust tail pipe corroded
handbrake almost at end of travel
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
surface corrosion underside of vehicle
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
surface corrosion underside of vehicle
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear brake disc excessively pitted (3.5.1h)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Rear brake disc excessively pitted (3.5.1h)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear brake disc slightly scored (3.5.1h)
Offside Rear brake disc slightly scored (3.5.1h)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Offside Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
VF03 KYC is a 2003 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying VF03 KYC, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of VF03 KYC?
You can check the full history of VF03 KYC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was VF03 KYC registered?
VF03 KYC is a 2003 Mercedes-benz Vito, first registered on 15 August 2003.
Is VF03 KYC safe to buy?
The MOT history for VF03 KYC shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does VF03 KYC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on VF03 KYC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.