2015 Lexmoto Venom

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Fork legs pitted

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Position lamp not working (4.2.1 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Both fork legs are pitted

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust noisy (8.1.1 (a))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake fluid contaminated (1.8 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake fluid contaminated (1.8 (a))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Mudguard insecure Cracked and slightly loose

Front Suspension corroded but not seriously weakened Fork stanchions corroded (5.3.3 (b) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced corrosion on swingarm (6.1.1 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Tubeless valve quite perished

Front Tyre worn close to the legal limit 2mm (5.2.3 (e))

Gear linkage has play

Rear Brake disc has very slight cracking on very outer edge

Rear Rear Brake master cylinder mountings are worn

Rear Tubeless valve quite perished

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tubeless valve quite perished

Front Tyre worn close to the legal limit 2mm (5.2.3 (e))

Gear linkage has play

Rear Rear Brake master cylinder mountings are worn

Rear Tubeless valve quite perished

Rear Tyre worn close to the legal limit (5.2.3 (e))