2006 Toyota Aygo

Electronic stability control warning lamp indicates a fault (7.12 (e))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Track rod end ball joint has excessive play both sides (2.1.3 (b) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Parking brake requirements only just met. It would appear that the braking system requires adjustment or repair

Play in steering rack inner joint(s) ()

Rear Brake pipe corroded, covered in grease or other material O/S N/S (1.1.11 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement O/S N/S Trailing arm (5.3.4 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Suspension component mounting prescribed area is corroded but not considered excessive O/S N/S front and rear (5.3.6 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Parking brake requirements only just met. It would appear that the braking system requires adjustment or repair

Play in steering rack inner joint(s) ()

Rear Brake pipe corroded, covered in grease or other material O/S N/S (1.1.11 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement O/S N/S Trailing arm (5.3.4 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Suspension component mounting prescribed area is corroded but not considered excessive O/S N/S front and rear (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Exhaust system insecure (6.1.2 (a))

Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e)) DANGEROUS

Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Headlamp aim too high (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)